HVAC Supplies - Page 777

Manufacturer: Rheem Brand: OEM Replm for Rheem

This is a Brand New OEM Capacitor

Manufacturer: HomeSaver Brand: Copperfield Chimney Supply Color: stainless steel

HomeSaver's single-flue caps are available in 3/4" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. for the customer with budget in mind, you can't go wrong with the galvanized painted black model. Features: Material: 304-alloy stainless steel. 18-ga. base and mesh, 24-ga. lid. Lifetime Warranty for stainless steel. Lifetime Warranty on workmanship and materials. Specifications: Overall Dimensions: 12" (W) x 12" (D) x 8" (H). Fits Outside Dimensions: 10-1/2"X10-1/2" to 13"X13". Mesh: 3/4".

Manufacturer: VenTech Brand: VenTech Model: VT FS-4

Our Mufflers are shipped as a pre-assembled unit constructed of heavy duty steel, and features a specially designed Open-Cell Convoluted Foam or "egg crate". This interior lining is used to reduce the amplitude of excess sound waves produced by an Inline Fan. Mufflers are engineered as an acoustic soundproofing device designed to reduce the loudness of the sound pressure. With a 6" flange on both ends, the VenTech Muffler will reduce Inline Fan noise output by up to 25 decibels. Disclaimer- The use of Ventech products should be installed professionally and not in enclosed areas. Buyer represents that by purchasing Ventech products, buyer has special knowledge or has consulted a professional on product's use. In no event will the Company or any of its subsidiaries or their parent companies be liable to you for any direct, special, indirect, consequential, incidental damages or any damages of any kind even if the Company has been advised of the possibility thereof.

Manufacturer: Stiebel Eltron Brand: Stiebel Eltron Model: CKT 20E Color: White

The Stiebel Eltron CKT 20E is a wallmounted space heater that operated on 240 or 208 volts. With its elegant design this product is a perfect addition for anywhere you need quick heat. The builtin fan allows the CKT 20E to be quiet while operating at on 49.7 dB. This product has a thermostat and an adjustable knob located on the right side to set your desired temperature with ease. It can quickly warm a room and maintain the temperature of your choice. Unlike the CK models, this particular product has a 60 minute timer where it will output the maximum level of heat it can to decrease the amount of time it takes to heat a room. The CKT 20E comes complete with a frost protection setting. When you set this unit's thermostat to the lowest possible setting, it will maintain an above freezing temperature in an appropriately sized room. With almost 90 years of experience and tradition to excellence, you can rest assured in the CKT 20E's reliability.

Manufacturer: DHHX Co Brand: Coavas Color: Stytle7

Window film privacy Description: The perfect way to add a little privacy to any space without giving up the beauty and warmth that natural lighting brings. Get the look of frosted glass with easy do-it-yourself application. Using static cling with no adhesives, our window film is easy to apply and removes without residue. Softly filters light while providing privacy. Window film privacy Features: The perfect way to add a little privacy to any space without giving up the beauty and warmth that natural lighting brings. Easy to apply and removes without residue. Suitable for interior and exterior facing window installation and printed with eco friendly inks. Perfect for office. Patterns repeat to cover any size window. Window film privacy operating instruction: Step 1. Keep Window or Glass clean Step 2. Wet the Window or Glass with water( Soapy water will be the best choice ) Step 3. Remove the Static Film from backing protect sheet ( Please MAKE SURE you have removed it before you apply the window film to glass) Step 4. When you install it, Apply to wet glass and smooth with hands. Step 5. Squeegee away water and air bubbles. Step 6. Much easier than Wall Decals, it's no problem for you. Step 7. Enjoy your works! If you want to remove it, simply peel the window film from any corner. It comes off cleanly leaving no residue.

Manufacturer: Garage Door Parts Brand: Garage Door Parts

Aluminum Adjustable Bottom Seal Retainers 1-3/4" x 3"   ,Garagee Door Aluminum Adjustable Bottom Seal Retainers   Retainers accept 1/4" T-style rubber or vinyl seals,and T-Bulb Seals (available above).   Adjustable to conform to uneven floors. Contact insures tight seal. Saves money by reducing energy loss year round.   ACTION aluminum bottom seal retainers are made of high strength aluminum ore.   Available in Mill finish. Designed to be versatile and longer lasting. Installs quickly and easily in just minutes.   1-3/4" X 3" Adjustable Bottom Seal Retainer ,4ft Seal Retainer (Actual Length 49") ,4'-1" X 1-3/4" X 3" Aluminum Seal Retainer ,1-3/4" X 3" Adjustable Bottom Seal Retainer ,8ft Seal Retainer (Actual Length 98") ,8'-2" X 1-3/4" X 3" Aluminum Seal Retainer ,6mos Manufactures Warranty 

Manufacturer: C.R. Laurence Brand: CR Laurence Model: 25VRA32

Slotted Holes for Easy Adjustment This CRL Door Bottom Seal features a thermo-plastic elastomerseal for exceptional cold weather protection and stays flexible between -70¢ªF (-57¢ªC) and +250¢ªF (121¢ªC) temperatures. Stainless steel fasteners are provided. Color: Aluminum Length: 32 in (813 mm)

Manufacturer: Cleverbrand Inc. Brand: Cleverbrand Inc.

This is a closed cell sponge neoprene that will not absorb water or oil. It is often referred to as weather stripping or rubber sealing and is primarily used as sealing tape to block air, dust and moisture. Neoprene stripping is used for store fixtures, noise insulation, padding, expansion joints of precast concrete and steel, HVAC & refrigeration, and is an excellent door seal for truck and bus bodies. Simply peel back the liner to expose the adhesive on one side and apply to metal, plastic, wood and other smooth surfaces. There may be a tolerance of up to +/- 3/8" from the stated size.

Manufacturer: IDEC Brand: Idec Model: ASD320N

Idec Asd320n Selector Switch

Manufacturer: American Standard Brand: Rplm for American Standard

This is a Brand New Furnace Ignitor Igniter