HVAC Supplies - Page 531

Manufacturer: ESSEX Brand: ESSEX

RELAY SPDT COIL: 120VAC CONTACT 277VAC 18A FLANGE MOUNT

Manufacturer: Fasco Brand: Replacement for Fasco

This is a Brand New OEM Furnace Replacement Inducer Motor Kit

Manufacturer: Emerson Climate Technologies Brand: Emerson Thermostats Model: 586-317111 Color: 4.5

The White-Rodgers 586-317111 DC Solenoid, SPDT, 36 VDC Isolated Coil, N.O Continuous Contact 200 Amps, Inrush 600 Amps.

Manufacturer: Honeywell Brand: Honeywell

This is a Brand New Upgraded Furnace Pilot Ignition Control Circuit Board.

Manufacturer: Glasfloss Brand: Glasfloss

The Glasfloss Z-Line Series pleated filters offer improved performance for virtually every application. All Glasfloss Z-Line pleated filters feature fibers which do not absorb moisture and will not support microbial growth. The Glasfloss Z-Line Series MR-11 filters achieve a MERV 11 rating per the ANSI/ASHRAE 52.2 Test Standard. The Z-Line Series MR-11 pleat is available in many standard face dimensions in 1", 2", 4", and 6" depths. Glasfloss Z-Line Series pleated filters incorporate media which is laminated to a galvanized metal that stabilizes the media during operation. The pleats are formed in a radial configuration to ensure proper dust-loading. The standard pleated cartridge is bonded into a two-piece heavy-duty beverage board diecut frame that creates a double-wall thickness around the filter and prevents air bypass. The die-cut grilles are internally bonded to the pleat apexes on the air-entry and air-exit sides to ensure maximum integrity and support during the life of the filter. Glasfloss Z-Line Series pleated filters are used in a broad range of installations, from pre-filters to primary filters for computer room units. Whether used as primary filters or as pre-filters in multi-stage systems, Glasfloss Z-Line Series pleated filters offer a solution for virtually every residential, commercial, and industrial HVAC application.

Manufacturer: Volkswagen Brand: Volkswagen

VOLKSWAGEN 1C0825245E GENUINE OEM SIDE COVER

Manufacturer: Tier1 Brand: Tier1

This Tier1 16X25X5 air filter is rated at MERV 11 to capture 90% of particles, 1-3 microns in size. Replacement for: Goodman M1-1056, G1-1056 and other brand part numbers ending in MU1625.

Manufacturer: Diversitech Brand: Diversitech Model: UC3232-2

This Diversitech, model UC3232-2, is a UltraLite Pad, size 32 x 32 x 2. A true concrete equipment pad at the weight of plastic (about 2.5 lbs. per square foot). UltraLite is strengthened by miles of fiber in each square foot of fiber-cement coating. This fiber allows the pad to flex instead of cracking or breaking. The textured surface prevents the condensing unit or portable generator from sliding, and allows water drainage, while the engineered encapsulated polystyrene (EPS) core prevents warping and provides a solid bottom to resist settling. Unaffected by soil conditions, ultraviolet (UV) light, temperature extremes, and other weather conditions. The 2” thick UltraLite pad is the industry standard. Used across a wide variety of applications, unless a thicker pad (3”) is required by the local building code.

Manufacturer: Finejo Brand: Aceshin Model: SV001584

100% Brand New. Material: Cotton blend Size: 8.5cm x 7.5cm x 3cm  (L x W x H) (Approx) Humidity measuring range: 1% ~ 99% RH Humidity controlling range: 1% ~ 99% RH Humidity measuring error: 3% Resolution: 1% RH Sensor Type: HM-40 Power Suppler: AC 220V Current: MAX 200MA Data retention: Yes Power consumption: < 3W, Max 200mA Relay contact current: AC 5A/220V Temperature compensation: Yes Data Retention: Yes Working temperature: 0 degree - 50degree Storage temperature:  -10degree - 60degree Package Content: 1 x Humidity controller WH8040 1 x Humidity controller sensor probe with cable 1 x Temperature sensor probe with cable

Manufacturer: Schluter Systems Brand: Kerdi Model: KERDI200/5M

Schluter-KERDI is a bonded waterproof membrane with limited crack-bridging capabilities. It is made of soft polyethylene, which is covered on both sides with a special fleece webbing to anchor the membrane in the thin-set mortar. Schluter-KERDI was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings. Tiles can be installed directly on Schluter-KERDI using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used. Pre-cut sections of Schluter-KERDI are available for inside and outside corners, as well as for pipe collars. Use Schluter-KERDI-BAND, in widths of 5" (12.5 cm), 7-1/4" (18.5 cm), or 10" (25 cm) to seal butt joints or corner joints. Schluter-KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.