HVAC Supplies - Page 1271

Manufacturer: Schluter Brand: Caleffi

This is a set of steel washers used in conjunction with KERDI-BOARD-ZS coarse wood screws to fasten Schluter-KERDI-BOARD to stud framing.

Manufacturer: HVAC Express Brand: HVAC Express

Multi-purpose wall vent with damper & screen for bathroom fans, range hoods, kitchen hoods & commercial exhaust applications.Features: Used for Kitchen, Range, Bath, Wall and any and all venting except Dryer Vents 8.5 inch collar pipe extension and 1/4 inch bug screen. (1/8 inch screen available) Durable Heavy Grade Aluminum & Available in 3"-16"Rounds Sizes Sleek proven wind and rain proof design Accessory: In-line butterfly dampers sold here for extra back draft protection Available in Copper, Stainless Steel & Galvanized, Click HERE: Dimension Sheet: Round Wall Vent with Damper & Screen

Manufacturer: HVAC Express Brand: HVAC Express

Adjustable roof base for round ducting ventilators including turbines, gravity ventilators, and aero foiles. Available in sizes 3" to 14". Crimped end for easily installation of vent on the base

Manufacturer: HVAC Express Brand: HVAC Express

Motorized Dampers made of heavy grade steel, with foam seal, high quality Erie Motor, and one crimped end. Used in zone systems for commercial and residential applications. Also for controlled exhaust and other HVAC air flow management. Finished product and components proudly manufactured in our Great United States of America.

Manufacturer: Sheet Metal Co Brand: Sheet Metal Co.

METAL Ductboard Take off Start COLLAR for HVAC Duct Work. Galvanized metal for long lasting performance. Solid Metal Sheet to hold your duct well in position.

Manufacturer: iPower Distributor L&G Brand: Ideal-Air Model: 738702 Color: Silver

Ideal-Air ducting is a premium thermally insulated, sound absorbing flexible ducting. This ducting has been developed to minimize heat gain or loss resulting from the temperature difference between the air flowing in the duct and the surrounding air. Ideal-Air premium ducting is covered with a multiple layer aluminum polyester, fire resistant jacket to provide an excellent vapor barrier and to prevent condensation.

Manufacturer: iPower Distributor L&G Brand: Ideal-Air Model: 738704 Color: Silver

Ideal-Air ducting is a premium thermally insulated, sound absorbing flexible ducting. This ducting has been developed to minimize heat gain or loss resulting from the temperature difference between the air flowing in the duct and the surrounding air. Ideal-Air premium ducting is covered with a multiple layer aluminum polyester, fire resistant jacket to provide an excellent vapor barrier and to prevent condensation.

Manufacturer: Fantech Brand: Fantech Model: DBLT 4W Color: Multicolored

Galvanized metal lint trap for dryer boosting applications. Use when duct length between dryer and booster fan is less than 15 feet. Fits 4-inch duct. Features pull out white door with a view window with attached removable lint filter for easy cleaning and 1/2" flange for flush mount installation. The lint trap complements all Fantech dryer booster fans.

Manufacturer: Z-Flex Brand: Z-Vent

Z-Flex Z-Vent 4" x 6" Stainless Steel Vent Pipe (2SVEPWCF04.5). This straight piece of pipe has a silicon gasket and an integral gear clamp on the female end. The male end can be cut to size with a hacksaw. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tankless water heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

Manufacturer: Z-Flex Brand: Z-Vent

Z-Flex Z-Vent 3" x 4' Stainless Steel Vent Pipe (2SVEPWCF0304). This straight piece of pipe has a silicon gasket and an integral gear clamp on the female end. The male end can be cut to size with a hacksaw. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.