HVAC Supplies - Page 661

Manufacturer: Schluter Brand: Schluter Model: DHTB810M

This revolutionary new membrane by Schluter-Systems provides a thermal break that can reduce the warm-up time of a heating system by up to 70% while still providing the uncoupling and ease of installation provided by the original DITRA-HEAT membranes. These thin 5/16" mats are designed with the same stud structure as the original DITRA-HEAT Membrane, allowing cables to fit snuggly into the mat for a quicker installation and lower profile floor than when installing traditional DITRA Uncoupling Membranes and/or insulation layers such as cork with heating mats cables. Simply install your cable of choice between the studs of the mat at the desired spacing the manufacturer's instructions, then thin-set and tile over the membrane.

Manufacturer: Valutech Brand: Valutech

*** THE 12 x 18 HAS 3/4" PORTS *** Our Water to Air Heat Exchanger are a great fit for a variety of heating and cooling applications. These compact units are designed to maximize heat transfer by utilizing a series of 3/8" copper tubes with a high density of aluminum fins. These fins are spaced such that the fin density is 12 fins per inch. This design enables heating loads of 50,000-60,000 Btu per square foot. Despite such high fin density there is minimal flow resistance through these water to air heat exchanger coils. Applications: Residential Heating Apartment Buildings and Condominiums Hybrid Systems Air Conditioning Dehumidification. Highest Quality in the business.

Manufacturer: Owens Corning Brand: Owens Model: RU70

"OWENS CORNING" INSULATION FOR ATTICS *For attic re-insulation *R30 *15"W x 25 ft. long *Unfaced *Continuous roll - Ecotouch *Energy Star *Green Guard certified *Formaldehyde free *Polybagged

Manufacturer: Fasco Brand: Fasco

This is a Brand New Upgraded Furnace Inducer Motor

Manufacturer: Fasco Brand: Replacement for Armstrong

This is a Brand New OEM Furnace Replacement Inducer Motor Kit

Manufacturer: Starlight Brand: Hotpoint

This is a Brand New Dryer Replacement Ignitor

Manufacturer: Englander Brand: Englander / Summers Heat / Timber Ridge Model: PU-AF11B

Bottom Auger For all: 25-PDV, 25-PDVP, 55-SHP15, 55-SHP22 and 55-SHP22L, 55-TRP15, 55-TRP22, American Heritage and US 25-5670 Parts | 25-PI, 55-SHP20 and 55-TRP20 Parts. NOTE: For models 1992-2000, and other than 25-PDVC, 55-SHP10 or 55-TRP10 order Part Number PU-AF12B.

Manufacturer: Carrier Brand: Carrier Model: DPFR20X25X5M13_2=DCR

Original box type design. Removes atmospheric and household dust, coal and insecticide dust, mites, pollen, tobacco smoke, cooking smoke, grease, mold, fungi and more down to 0.3 micron. This is an aftermarket filter.

Manufacturer: Sears Brand: OEM Replm for Sears

This is a Brand New OEM Furnace Replacement Fan & Limit Switch

Manufacturer: CARRIER Brand: Carrier Model: 325878-751

ICM282A Furnace Control - with software for enhanced controls operation in counterflow and downflow furnace applications. Replacement for OEM models including Carrier HK42FZ0-xx series control boards. Specifications: Line Voltage Range: 98 to 132 VAC @ 60Hz Ignitor: 5A @ 120 VAC Cool Blower: 30A, 2 HP, 240 VAC Heat: 5A, 1/2 HP, 240 VAC Inducer Motor: 4A, FLA-8.0 LRA @ 120 VAC Gas Valve: 1.5A @ 30 VAC Weight/Dimensions: Weight: 0.55 Height: 1.5 Width: 8 Length: 5 ICM282A Low cost replacement for Carrier HK42FZ004/007/008/009/011/013/016 Controls gas valve, ignitor, blower motor, inducer, humidifier and air cleaner Microprocessor-based precision Software for enhanced controls operation in counterflow and downflow furnace applications Designed for 100% gas shutoff in case of ignition failure Twinning compatible with another ICM282A board Reverse polarity protection Secondary brownout voltage protection Compatible with 24 VAC standard thermostat Diagnostic fault codes/LED to aid in troubleshooting cross reference:Carrier: HK42FZ004, HK42FZ007, HK42FZ008, HK42FZ009, HK42FZ011, HK42FZ013, HK42FZ016, 325878-751