HVAC Supplies - Page 1232

Manufacturer: Tjernlund Brand: Tjernlund Model: CS2

Pair with V-Series fans to boost the supply of outdoor air into crawl spaces with to few or undersized passive vents or stagnant areas around nee walls or corners. Faceplate can be trimmed for smaller opening.

Manufacturer: Acme Miami Brand: Acme Miami Model: AM-200

Mixed Flow fans combine the best of axial and centrifugal fans. The axial fan blade in a centrifugal housing results in excellent air volume, quiet operation and good power to overcome static pressure. All this and lower electrical consumption.

Manufacturer: Aero Pure Inc Brand: Aero Pure Model: AP 70 G5 W Color: White

Aero Pure bathroom fan solutions improve the air quality in the most used room in your home- the bathroom. You know bathroom ventilation is a necessity- to help remove unpleasant odors and to reduce the harmful effects of excessive moisture. But you hate using your bathroom fan because it's too darn loud and annoying! Aero Pure's 70-CFM Energy star qualified and HVI rated Quiet Fans clear the air and operate at exceptionally low noise levels- 1.0 sones. All Aero Pure Quiet Fans are installation-friendly and come standard with mounting brackets, vibration-dampening rustproof steel housing, built in backdraft damper to prevent outdoor air from entering through the fan, easy maintenance grilles and a full four-year warranty. Our Quiet AC fan motors are equipped with a thermal shut off and engineered for quiet operation. Low noise and energy efficiency add up to peace and quiet and energy savings to you. Now that sounds nice!.

Manufacturer: Durafan Brand: Durafan

The Durafan Select Speed Exhaust Fans are economical and versatile. The totally enclosed motor comes complete with built in speed switches and a 9' cord. No electrician is required to install these fans, just mount the fan in the wall and plug it into an approved receptacle. The corrosion resistant aluminum shutter comes complete with a tie bar to reduce shutter flapping and keeps the shutters closed when the fan is not running. On the intake side of the fan the balanced aluminum blade is protected by a strong chrome plated OSHA grill.

Manufacturer: Lighthouse Distribution Corp Brand: Broan-NuTone

About Broan-NuTone Broan-NuTone has been leading the industry since 1932 in producing innovative ventilation products and built-in convenience products, all backed by superior customer service. Today, they're headquartered in Hartford, Wisconsin, employing more than 3200 people in eight countries. They've become North America's largest producer of medicine cabinets, ironing centers, door chimes, and they're the industry leader for range hoods, bath and ventilation fans, and heater/fan/light combination units. They are proud that more than 80 percent of their products sold in the United States are designed and manufactured in the U.S., with U.S. and imported parts. Broan-NuTone is dedicated to providing revolutionary products to improve the indoor environment of your home, in ways that also help preserve the outdoor environment. Galvanized steel frame. High temperature and reinforced fiber thermal fabric. Stainless steel closure springs. Includes frame, mounting screws, and plaster guard. Fits Broan Nutone ultra series fans without light.

Manufacturer: Dayton Brand: Dayton

Attic Ventilator, Thermostatically Controlled Gable Mount, Voltage 120, 60 Hz, 1/8 HP, 4 Amps, 295 Watts, 1100 RPM, 1650 CFM @ 0.000-In. SP, Max. Attic Area (Sq.-Ft.) 2300, Free Air Intake Required (Sq.-Ft.) 5.4, Thermostat Temp. (Deg. F) 60 to 120, Includes Mounting Brackets

Manufacturer: Fantech Brand: Fantech Model: FQ110

Fantech FQ Series exhaust fans provide remarkably quiet, energy efficient ventilation for baths, powder rooms, and other areas. The 110 CFM is incredibly quiet with 0.7 sones sound rating. These mount exhaust fans are designed for intermittent or continuous operation to meet ASHRAE Standard 62.2. All models are ENERGY STAR qualified. Includes:Low profile grille fastened with torsion springs Energy efficient, permanently lubricated PSC ball bearing motor Galvanized steel housing with rustproof paint Integrated metal backdraft damper UL Listed for use over a tub/shower with a GFCI branch circuit wiring The industry's best 5 year warranty 5 adjustable hanger bars for easy installation between 16" to 24" oncenter studs

Manufacturer: DAYTON Brand: Dayton

' Guard Mounted Exhaust Fan, Blade Dia. 12 In., CFM @ 0.000-In. SP 828, CFM @ 0.125-In. SP 438, Voltage 115, 60 Hz, 1 Phase, Operating Amps 0.6, Motor HP 1/20, Max. Ambient Temp. 104 Degrees F, Motor RPM 1625, Motor Type PSC, Motor Enclosure Totally Enclosed Air-Over, Mounting Position Horizontal or Vertical, Mounting Holes O.C. 10-1/4 In., Guard Material Steel, Wire Guard Finish Gray Polyester, Outside Dia. 13 19/32 In., Blade Material Stamped Aluminum, Number of Blades 3 '

Manufacturer: TPI Brand: TPI

This TPI Corporation CES-30-G exhaust fan shutter is suitable for use with a TPI CE-30-D direct drive exhaust fan (not included) for protection from rain and snow when not in operation. This self-closing shutter protects the exterior side of the 30" fan blades and does not require external framing for installation.TPI Corporation manufactures industrial and commercial electrical heaters, process heat ovens, ventilation products and fans, lighting equipment, and thermostatic controls. The company, founded in 1950, is headquartered in Johnson City, TN.

Manufacturer: TPI Brand: TPI Model: CE10DS Color: Stainless Steel

This TPI Corporation CE 10-DS single phase 10-inch diameter direct drive exhaust fan has a built-in shutter mechanism and is suitable for ventilating a building to the outside. The blade assembly (consisting of a steel hub and spider) holds the fan head’s three aluminum paddles, which are enclosed by front steel spiral wire guards for strength. The built-in shutter mechanism allows the fan to be installed from inside, without external framing, and the self-closing shutters protect the fan from rain and snow when not in operation. The permanent split capacitor (PSC) motor provides both starting torque and the ability to run at variable speeds. The motor of the TPI direct drive exhaust fan is totally enclosed, making it suitable for use in conditions that standard, unenclosed motors are not, such as in the presence of dust or other airborne debris.SpecificationsMotor3-speed, 1 amp, 120 volt, single phase, 1/12 horsepower, permanently lubricated, totally closed ball bearing motor with permanent split capacitorSwitch typePull chainCordNo cord, junction box provided for direct wiringBladesAluminum (3)Blade guardsSteel spiral wireCubic feet per minute (CFM)680 / 540 / 460Weight11 lbs.Dimensions13.125 x 13.125 x 11.935 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Industrial fans are used in workplace environments to exhaust fumes or direct air flow. Most industrial fans have coated metal parts and lubricated motors that are permanently sealed to help protect against environmental hazards, such as dirt and airborne debris or corrosive fumes. They can have fan blade cages that meet workplace safety standards, as well as a variety of mounting mechanisms for precise placement to direct large volumes of air flow. Electronic circuitry for industrial fans matches the power specifications found in the workplace and provides the initial torque needed to start up a large bla...