Heaters & Accessories - Page 83

Manufacturer: Broan Brand: Broan Model: S97010320 Color: White

This Bathroom Heater Cover consists of a grille and springs assembly. Part is used in the 163/164/9427/9422 double bulb heater. Fits Brogan bulb heater models: 163, 164, 9427P-R01, 9422P-R01. Grille Dimensions: 15-3/4-inch by 10-1/4-inch by 1/2-inch. White Finish.

Manufacturer: Mi-T-M Brand: Mi-T-M Model: MH-0030-IM10

This Mi-T-M, model MH-0030-IM10, is a Propane Tank-Top Radiant, with Match Light, 6 Heat Settings, is a 20 lb. Cylinder, and 5lb. Net Weight. Its features include: Safety shut-off valve, High efficiency heat reflector, Clean, quiet, instant radiant heat. Its specifications include: Heat Output (Single Burner): L-9,000 / M-12,000 / H-16,000 BTU, (Double Burner): L-18,000 / M-24,000 / H-32,000 BTU, Max Operating House: L-48 / M-36 / H-14 hours, Shipping Weight: 6 lb.

Manufacturer: HeatStar Brand: Heatstar By Enerco Model: F170485

Convection 80K BTU natural gas heater HS80CVNG.

Manufacturer: Brazetek Brand: Brazetek

Brazetek Plate Heat Exchanger is designed for use in a variety of liquid-to-liquid heat transfer applications, where a reliable, efficient and compact heat exchanger is needed. Specs: Flow Rate: 40 GPM max. Connections: 1" Male Threaded Dimensions: 4.25" x 12.12" x 3.17" Max BTU output: up to 350,000 BTU/hr

Manufacturer: Ultratherm Brand: Ultratherm

11"x11" model- 15 watts. Ultratherm Vivarium Heaters have been manufactured in Scotland for over 20 years to exacting European Standards. UL Listed component. These pads can often be used WITHOUT a thermostat due to their low wattage density. The element is similar to heat tape but it is a far more durable, longer lasting material and is sealed in a polyurethane. The low wattage density of this product means in most cases it will maintain "reptile friendly" temps below 95 degrees. This can vary with the room temps so if precise control of temperature is needed these pads can also be used with a thermostat/rheostat. Ideal for users with only one or a few vivariums to heat. Also works well with plastic storage bins.

Manufacturer: Marley Brand: Marley Model: GFR2404T2

Giving the appearance of a central-system, a register style grille mounts on a back-box that fits from stud-to-stud in a 16" OC frame wall. Utilizing a tangential blower, this quiet, fan-forced unit is ideal for bedrooms, a study, a small office or any space where a quiet atmosphere is desired.

Manufacturer: Cadet Brand: Cadet Model: EBHN500WRH Color: White

Create a warm, peaceful sanctuary with the Cadet 240 Volt SoftHEAT Hydronic Electric Baseboard Heater. Its gentle and efficient warmth is perfect in bedrooms or nurseries, or for those with severe allergies.This modern update to the basic baseboard uses a self-contained circulating fluid and convection heating to provide a gentle, steady, warmth that fills the room evenly to keep you comfortable. Absolutely no plumbing, water supply, or refilling is ever required. Whisper quiet operation (no clicking or buzzing noises) and low surface temperatures make it ideal for bedrooms, dens, home offices, and for supplemental warmth in general. Popular use includes replacing old heaters or upgrading from a standard baseboard heater to improve energy efficiency and for increased comfort. Longer heat retention, greater energy savings, and minimal temperature variation are the most popular features of the SoftHEAT hydronic baseboard heater.The lower surface temperature has proven to make this the perfect heater for those who suffer from airborne allergens. The quality steel construction with a powder-coated paint smooth finish includes a 7-Year manufacturer's warranty. Hard-wired installation instructions are easy to follow: wiring is available at the left end of this model. Thermostat is required and sold separately.

Manufacturer: Rheem Brand: Rheem Model: SP20166C

Rheem SP20166C Combination Natural Gas ValveRheem SP20166C Combination Natural Gas Valve Features: For 30, 40 and 50 gallon FVIR models Not for direct vent and power vent models Natural Gas

Manufacturer: Brent Industries LLC Brand: Brent Industries LLC

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.  Product Data:Finned Area: 18" x 18"Overall Dimensions: 18-1/4" x 20" x 3-1/2" THICKOverall Dimesions (including Copper Manifold): 18-1/4" x 23-1/2" x 3-1/2" THICKRows of Tubes: 3 (3/8" Seamless Copper)Inlet/Outlet: 1" Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:120,536 BTU with 180°F Entering Water Temp., 15 GPM and 1800 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.

Manufacturer: Brent Industries LLC Brand: Brent Industries LLC

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.  Product Data:Finned Area: 20" x 20"Overall Dimensions: 20-1/4" x 22" x 3-1/2" THICKOverall Dimesions (including Copper Manifold): 20-1/4" x 25-1/2" x 3-1/2" THICKRows of Tubes: 3 (3/8" Seamless Copper)Inlet/Outlet: 1" Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:145,172 BTU with 180°F Entering Water Temp., 15 GPM and 2200 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.