Heaters & Accessories - Page 71

Manufacturer: Magic Heat Brand: Magic Heat Model: MH-6G

The only UL Listed heat reclaimer on the market, the Magic Heat will reclaim up to 30-Percent of lost heat from your heating appliance and distribute it into your home. Designed for use with all types of heating equipment with inside flue temperatures exceeding 350 degrees, skin temperatures of 250 degrees.

Manufacturer: Fahrenheat Brand: Fahrenheat Model: PLF1004 Color: Almond|Cream

Clean, crisp, contemporary styling in an attractive off white finish. Uniquely designed heating element is totally immersed in a specially formulated heat transfer liquid. Heater is UL listed to mount directly on any floor tile or carpet Approved wireway along bottom back of heater. Thermal cutout shuts off the heater in the unlikely event of accidental air blockage Cutout will automatically reactivate when temperature returns to normal.

Manufacturer: Pentair Brand: Pentair Model: 471587 Color: n/a

This hi-limit thermostat is designed to use with Pentair MiniMax NT STD, NT LN, NT TSI pool and spa heater models 200, 250, 300, 400 and also compatible with Pentair MiniMax CH pool and spa heater models 150 IID, 150, 200, 250, 300, 350, 400. 115-Degrees fahrenheit.

Manufacturer: Heat Wagon Brand: Heat Wagon Model: P1500 Color: White

120 Cfm Not 300 Cfm, Product Dimensions 13" L X 7.5" W X 11" H.

Manufacturer: Taco Brand: Taco Model: 009 BF5-J Color: Green

Taco 009 BF5-J Pump (Cast Iron pump with a Bronze Cartridge) - Is an upgraded and superior pump then the standard Taco 009 and equivalent base model pumps. The Bronze Cartridge increases the life of the pump and is able to handle the hard application better. This pump will seamlessly replace other pumps without any issues, it simply is the exact same pump as the Taco 009 with better parts inside. How much time do you waste replacing pumps? The cartridge is replaceable if you do have a failure. Taco 009 BF5-J Pump (Cast Iron pump with a Bronze Cartridge) - is specifically designed for high-head/high-flow applications in large residential and light commercial systems. It is ideal for high pressure drop boilers, fan coil units, heat exchangers, larger radiant systems, heat recovery and geothermal systems. The bronze cartridge 009 should be used on open loop systems. Taco 009 BF5-J & Taco 0011 BF4-J are the flagship pumps of the wood boiler industry. DO NOT compare this pump to the Taco 009-F5 pump. The F5 is the base model Taco 009. Ours is the PREMIUM Taco 009. *** GASKETS INCLUDED WITH PUMP *** Typical Applications: •Hydronic Heating •Radiant In-Floor/PanelHeating •Closed-Loop Solar Heating Systems.

Manufacturer: American Royal Brand: American Royal

YOU ASKED FOR IT, NOW HERE IT IS!  A HIGH QUALITY EXCHANGER AT A GREAT PRICE, 18 x 18 SIZE. THE METAL AROUND THE COIL IS 18 X 20 X 3 ½ INCH SIZE (NOT INCLUDING MANIFOLD THAT STICKS OUT OF THE PLENUM). 130,000 BTU, 3 ROW PASS. THIS UNIT HAS A LIFETIME PRO RATED WARRANTY THAT COVERS CUSTOMER ABUSE! YES, CUSTOMER ABUSE AS LONG AS YOU RETURN THE BAD EXCHANGER TO US. A COPY OF THE WARRANTY CAN BE SENT ON REQUEST. 1' COPPER PUSH ON OR SWEAT HEADERS. THIS ITEM IS NEW IN BOX. THE PHOTO IS NOT THE EXACT UNIT, BUT SHOWN AT A DIFFERENT SIZE SO YOU CAN GET THE IDEA OF WHAT YOU ARE GETTING. IF YOU HAVE QUESTIONS, PLEASE CONTACT US AND LET OUR KNOWLEDGEABLE STAFF HELP YOU GET YOUR PROJECT DONE RIGHT. NO NEED TO SHOP AROUND, BUY HERE WITH CONFIDENCE!

Manufacturer: American Royal Brand: American Royal

50 plate brazed water-to-water heat exchanger, 316 Stainless Steel. For use with outdoor wood boilers, hot water recirculation systems, snow melt, solar systems, and many other applications. Our large style 50 plate is 5" wide and 12" long! Don't be fooled by smaller units! These are heavy built quality units, NOT the cheaper 304 Stainless Steel! Maximum pressure 435. Minimum operating temperature -265° F, Maximum temperature 392° F. The feed and return is 1 ¼ " MPT. How to buy a brazed plate heat exchanger: 1. Length and Width. Sizing is not just about the amount of plates, but also the area for heat transfer! Ours are 12 inches long. 2. Port sizing. Most furnaces use 1" tubing, so make sure you are not buying 3/4" ports, as this will decrease water flow! Ours are 1 ¼ inch! They can be reduced down to fit your 1" tubing. 3. Proper sizing. If there is any question, ALWAYS buy the next size larger. It is always better to have more heat, than not enough! Here is a guide to help you: A. 10 plates are used for domestic hot water or small in-floor heating applications of less than 1100 sq ft. B. 20 Plates are used for smaller homes from 1100 - 2500 sq ft. C. 40 Plates are used for larger homes from 2500 - 4500 sq. ft. D. 70 Plates are used for areas 5000 - 7000 sq ft. The photo is not the exact unit, but shown at a different size so you can get the idea of what you are getting. If you have questions, please contact us and let our knowledgeable staff help you get your project done right. No need to shop around, buy here with confidence!

Manufacturer: Brent Industries LLC Brand: Brent Industries LLC

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.   Product Data:Finned Area: 22" x 22"Overall Dimensions: 22-1/4" x 24" x 3-1/2" THICKOverall Dimesions (including Copper Manifold): 22-1/4" x 27-1/2" x 3-1/2" THICKRows of Tubes: 3 (3/8" Seamless Copper)Inlet/Outlet: 1" Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:173,923 BTU with 180°F Entering Water Temp., 18 GPM and 2400 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.

Manufacturer: Mr. Heater Brand: Mr. Heater Model: F276186 Color: BRASS/BLACK

This quick disconnect system makes any setup a breeze to connect and disconnect at a moments notice

Manufacturer: Broan-Nutone Llc Brand: Broan Model: 154 Color: Satin Aluminum Finish

Wire Element 1250W Ceiling Fan Forced Heater