HVAC Controls - Page 61

Manufacturer: Xylem Inc. Brand: Bell & Gossett

The circuit setter calibrated balance valve is designed specifically for pre-set proportional system balance. This system balance method, developed by B&G, assures optimum system flow balance at minimum operating horsepower.

Manufacturer: Valemo Controls Brand: Valemo Controls Model: V3212-A1S

Superior performance, durable construction, valve body forged brass, actuator with all metal gears inside and corrosion-resistant stainless steel housing. Controlling flow of water in hydronic heating or cooling systems, 24V power supply, Includes end switch for signal feedback and control. 1/2" soldering/sweat connections. Frequency - 50/60 Hz. Wire length - 18" Perfect replacement for any of the following zone valve installations: - Honeywell - Belimo - Caleffi - Erie/Schneider - Barber Colman - Bell & Gossett - Flair - Taco - Erie - Superior - White Rodgers - Detroit

Manufacturer: Protech Brand: Protech Model: 662766164589 Color: Multicolored

This kit allows retrofit of older furnace models with hsi ignition which originally had integrated flame sensing through the hsi ignitor. Mounting brackets are included for both ribbon style and in shot style Burners, along with ignitor 62-23543-01.

Manufacturer: Stens Brand: Stens Model: 265779

Stens carries a wide variety of OEM / aftermarket replacement parts for small engine outdoor power equipment. Fits e-z-go 4-cycle, 1991 and newer, gas; for 295cc and 350cc engines

Manufacturer: OneTrip Parts® Brand: OneTrip Parts®

This capacitor is the direct replacement for many Rheem, Ruud, and Weatherking models. This capacitor replaces Rheem Ruud Weatherking part numbers 43-22362-07, 43-25135-18, 8552-69, 8552-550, 8552-578, and 8552-592. This part is covered by the exclusive OneTrip Parts® two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized OneTrip Parts® dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications.

Manufacturer: BACO ENGINEERING Brand: BACOENG

Technical Parameter:  Product size: 1/2" FNPT DN15 Maximum Working Pressure: 1.0MPa Circulation Medium: Water,Oil,Gas Rated Voltage: DC12V Wiring Control Methods:CR01/CR04/CR05 Working Current: 80MA Open/close Time: 3-5 sec. Valve Body Material: Brass Actuator Material: Engineering Plastics Sealing Material: EPDM Cable Length: 0.5m Environment Temperature:-15~50 Celsius Liquid Temperature: -5~100 Celsius Manual Override: NO Indicator: NO Protection Class: IP65 Application:  1.HVAC  2.Water treatment  3.Chemical process  4.Small industrial equipment for automatic control  5.Replacing solenoid valve, particularly when solenoid cannot work reliably  6.Automatic control systems 7.Efficient water-saving, water equipment 8.Solar hot water project 9.Regular watering the flowers, Timing humidifying，timing of drainage of Air compressor . Features:  1).Smart shape, Perform reliably, large output torque, as long as 50000-100000 times , convenience for all kinds of requirements.  2).Float ball design, no leak, large flow, the valve is bi-directional ball valve , regardless of inlet and outlet , most suitable for heavy dirt and long time no action.  3).The conditions that solenoid valve can not work. 4). High protection class, can be worked in moist conditions.  5).POM cooperate with metal gear, the POM gear is used in high-speed level to reduce noise, At the same time metal gear is applied at the low-grade to ensure the reliability of the gear. 6).Electrical and mechanical limit integrated design, accurate localization , high consistency , put an end to swing of valve.

Manufacturer: BACO ENGINEERING Brand: BACOENG

Technical Parameter:  Product size: 1" FNPT DN25 Maximum Working Pressure: 1.0MPa Circulation Medium: Water,Oil,Gas Rated Voltage: DC12V Wiring Control Methods:CR01/CR04/CR05 Working Current: 80MA Open/close Time: 3-5 sec. Valve Body Material: Brass Actuator Material: Engineering Plastics Sealing Material: EPDM Cable Length: 0.5m Environment Temperature:-15~50 Celsius Liquid Temperature: -5~100 Celsius Manual Override: NO Indicator: NO Protection Class: IP65 Application:  1.HVAC  2.Water treatment  3.Chemical process  4.Small industrial equipment for automatic control  5.Replacing solenoid valve, particularly when solenoid cannot work reliably  6.Automatic control systems 7.Efficient water-saving, water equipment 8.Solar hot water project 9.Regular watering the flowers, Timing humidifying，timing of drainage of Air compressor . Features:  1).Smart shape, Perform reliably, large output torque, as long as 50000-100000 times , convenience for all kinds of requirements.  2).Float ball design, no leak, large flow, the valve is bi-directional ball valve , regardless of inlet and outlet , most suitable for heavy dirt and long time no action.  3).The conditions that solenoid valve can not work. 4). High protection class, can be worked in moist conditions.  5).POM cooperate with metal gear, the POM gear is used in high-speed level to reduce noise, At the same time metal gear is applied at the low-grade to ensure the reliability of the gear. 6).Electrical and mechanical limit integrated design, accurate localization , high consistency , put an end to swing of valve.

Manufacturer: BACO ENGINEERING Brand: BACOENG

Technical Parameter:  Product size: 3/4" FNPT DN20 Maximum Working Pressure: 1.0MPa Circulation Medium: Water,Oil,Gas Rated Voltage: DC12V Wiring Control Methods:CR01/CR04/CR05 Working Current: 80MA Open/close Time: 3-5 sec. Valve Body Material: SS304 Actuator Material: Engineering Plastics Sealing Material: EPDM Cable Length: 0.5m Environment Temperature:-15~50 Celsius Liquid Temperature: -5~100 Celsius Manual Override: NO Indicator: NO Protection Class: IP65 Application:  1.HVAC  2.Water treatment  3.Chemical process  4.Small industrial equipment for automatic control  5.Replacing solenoid valve, particularly when solenoid cannot work reliably  6.Automatic control systems 7.Efficient water-saving, water equipment 8.Solar hot water project 9.Regular watering the flowers, Timing humidifying，timing of drainage of Air compressor . Features:  1).Smart shape, Perform reliably, large output torque, as long as 50000-100000 times , convenience for all kinds of requirements.  2).Float ball design, no leak, large flow, the valve is bi-directional ball valve , regardless of inlet and outlet , most suitable for heavy dirt and long time no action.  3).The conditions that solenoid valve can not work.  4). High protection class, can be worked in moist conditions.  5).POM cooperate with metal gear, the POM gear is used in high-speed level to reduce noise, At the same time metal gear is applied at the low-grade to ensure the reliability of the gear. 6).Electrical and mechanical limit integrated design, accurate localization , high consistency , put an end to swing of valve.

Manufacturer: Binford Supply House

Bibb Seat For Symmons. Works perfectly in all Symmons TA4 applications

Manufacturer: Payne Brand: OEM Replm for Payne

This is a Brand New OEM Furnace Replacement 3" Limit Switch