Registers, Grilles & Vents - Page 99

Manufacturer: Welland Brand: WELLAND Model: WO-024-BB

The baseboard diffuser is made of White Oak.It provides two-way diffusion and offers an aesthetically pleasing look to any home. Size: 24"

Manufacturer: Welland Brand: WELLAND Model: H-0410-S

It is designed to lay flat with the surface of the wood flooring, provides two way diffusion and is the preferred style for sand and finish hardwood floors where an architecturally smooth look is desired. Each frame is grooved on the outside to accommodate most 3/4" tongue and groove flooring. It is recommended that this floor register be installed during the installation of your hardwood floor, while the use in traffic area is not recommended. Duct opening size 4"x10".

Manufacturer: TruAire Brand: Truaire Model: 170 26X12

26"w X 12"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White26"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 27.75" Width X "w X 13.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEYou may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests. Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time. This grille has a high standard of design, production and finish on all products. Every part is hand inspected for quality before it is packaged, no exceptions. No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface. Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment Easy Unrestricted Air Flow. How To Measure A Grille Overall Size: Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint. Total outer size of this grille is; listed size +1.75". Width vs Height The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.

Manufacturer: Welland Brand: Welland Model: RO-08-RAD

The baseboard diffuser is designed for use in homes where duct openings are located at the edge of the floor or at the base of the wall. It offers an aesthetically pleasing look to any home. This wooden baseboard diffuser can be used with bottom feed air systems AND rear air system, the back and bottom without dampers.

Manufacturer: Sunstone Metal Products LLC. Brand: SUNSTONE Model: Vent-Gbox Color: Stainless Steel

Sunstone Stackable Vent Box is perfect for Masonry islands, stacks just like a stone block, can be installed into frame built islands as well with the pre-drilled holes. Insert up to 3-Gang Electrical box, or add in your favorite accent lighting in box. The Vent Box allows for plenty of ventilations for your island and is built with all 304 Stainless Steel for durability to last a lifetime.

Manufacturer: NuTone Brand: Nutone Model: 673AMZ Color: White

This NuTone kit includes a new motor, blade, bracket and grille. Part is a Genuine OEM NuTone motor fan motor assembly. Grille is 8-inch size, white plastic. Fits the Brogan ceiling fan model 673.

Manufacturer: Accord Brand: Accord Ventilation Model: AMFRSNMA414 Color: Satin Nickel

Accord Ventilation model AMFRSNMA414 is a Satin Nickel, 4-Inch x 14-Inch(Duct Opening Measurements), Floor Register with a Manhattan Design. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.

Brand: Battic Door Energy Color: Gray

Energy Efficient Insulated Crawl Space Foundation Vent Cover Installs Easily Sized to fit a typical concrete block opening. Our vent fits a rough opening of minimum 14 1/2 inch x 7 inch. The overall face plate size is 19 1/2 inch x 10 inch. Stainless steel rods are 9" long. Proper venting of homes with a crawl space foundation has long been a challenge for homeowners. Proper crawl space foundation ventilation prevents the buildup of mold and moisture. Most homes have fixed vents that limit airflow in warmer weather and that do not seal well or at all in winter. Our vent provides ventilation, and the insulated panel can be installed during the heating season. This allows you to add some heat into your crawlspace foundation to keep your pipes and your floors from freezing. The vent is insulated and serviced from the outside, so there is no need to enter the crawlspace foundation. Our vent can be retrofitted to existing homes, is easily serviced, easily insulated, and easily adapted to meet the changing seasons. This vent is the only product available that help homeowners solve these problems. Faceplate is made of heavy duty, durable, gray color ABS plastic. No painting needed (but can be painted if desired). Stainless steel rods and screen. Our vents have a 80% free area = 61 square inches free air opening per vent.