Ignitors

Manufacturer: Frigidaire Brand: Frigidaire Model: 5303935066 Color: white

Replacement gas oven ignitor. This is a genuine replacement Frigidaire ignitor. This is a flat style 3.72" ignitor with 18" of wire and 1/16 of exposed white ceramic. Amperage ranges from 3.2-3.6. This kit includes mounting bracket and wire nuts.

Manufacturer: Norton Brand: Protech Model: 62-22868-93 Color: Multicolored

This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces. This part is a direct replacement. It will fit exactly and requires no adapters or wiring changes. This part WILL NOT fit the -GEC and -GED "Drum" furnace models. This parts replaces part numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514. These ignitors are extremely fragile and should be handled with care.

Manufacturer: OneTrip Parts® Brand: OneTrip Parts® Model: C-LH33ZS004

This ignitor is the "wide" style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion of the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Carrier, Bryant, Payne, and Day & Night furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004. This part is covered by the exclusive Duralight® two year limited replacement policy when purchased through an authorized Duralight® dealer. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized OneTrip Parts® dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications. This item is sold for professional installation only in accordance with all local, state, and national codes and licensing requirements.

Manufacturer: OneTrip Parts® Brand: OneTrip Parts

This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces. This part is a direct replacement. It will fit exactly and requires no adapters or wiring changes. This ignitor replaces both the Norton 201 and 271 types used on Rheem, Ruud, and Weatherking furnaces. This part WILL NOT fit the -GEC and -GED "Drum" furnace models. This parts replaces part numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a "hot spot" and lead to premature failure. This part is covered by the exclusive Duralight® two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight® dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications.

Manufacturer: Robertshaw Brand: Robertshaw

This ignitor is the "wide" style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion if the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Carrier, Bryant, Payne, and Day & Night furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004.

Manufacturer: OneTrip Parts® Brand: OneTrip Parts Model: S-02532625000

This hot surface ignitor is the replacement for many York, Luxaire, Coleman, Coleman-Evcon, Fraser/Johnson, and Air Pro furnaces made by Unitary Products Group. This ignitor has insulated wires that are 5-1/4" long. The wires are terminated with the proper OEM plug (see photos) and requires no splicing or modifications. This part will also replace the spiral ignitor used on models P1UK, P9MP, P2MP, P2DP, PAKU, PBKM, PBKD, XEUO2, XEMO2, and XEDO2. This part replaces part numbers 025-32626-000, 025-31801-000, 025-30277-700, 025-31802-000, 025-30385-700 and 025-32625-000. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a "hot spot" and lead to premature failure. This part is covered by the exclusive Duralight® two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight® dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications.

Manufacturer: Neuco Inc Brand: Rheem Model: 62-23543-01 Color: Multicolored

This is a genuine replacement part. The model number and name for the following item is: Neuco Inc. 62-23543-01 Flame Sensor.

Manufacturer: Bryant/Carrier Brand: Bryant

LH33ZS004, IGNITOR, Bryant/Carrier

Manufacturer: Universal Brand: Lennox

This is a Brand NEW Upgraded Silicon Nitride Furnace Hot Surface Ignitor.

Manufacturer: Corsaire Brand: OEM Rplm for Corsaire

This is a Brand New OEM Furnace Pilot Burner Assembly