Fireplaces & Accessories - Page 141

Manufacturer: HomeSaver Brand: Chimney

Lock-Top Damper Installation Cable Pack. Note: Don't use Lock-Top dampers with gas logs - failure to open could cause carbon monoxide to back up into the house. In case of a gas leak, gas could be trapped in the flue, resulting in an explosion. Includes: Handle assembly (spring handle, jack chain, brass lug, triangle), keyhole bracket, two nail anchors, allen wrench, plus a 32' cable and 3 oz. adhesive. Features: Lifetime Warranty. Silicone rubber seals tight. Stainless steel and cast-aluminum construction, 30' cable and hardware. Adhesive.

Manufacturer: R.H. Peterson Brand: RH Peterson Co.

R.H. Peterson SDPG4-30 30" Split Oak Designer Plus Gas Logs for Vented Natural Gas fireplaces with Standard Match-Light Burner. No Safety Pilot (Cannot be operated by remote control). Includes G4-30 RADCO approved 90000 BTU burner with No Pilot control system (no valve with No Pilot control).

Manufacturer: Grand Canyon Gas Logs Brand: Grand Canyon Gas Logs

The Quaking Aspen is part of Grand Canyon Gas Logs three native collections. The Quaking Aspen logs are cast from real logs found in nature and then hand painted to bring to life the natural beauty. Like the Arizona Juniper collection the logs for the Quaking Aspen were discovered in the backwoods of the Northern Arizona Forest. The name Quaking Aspen comes from the appearance of the Aspen tree when the wind is blowing. The leaves of the tree are attached to the branches with a long petiole; this allows even the faintest of breezes to cause the leaves to flutter. The fluttering effect gives the appearance that the Aspen is "Quaking" or "Trembling" hence the name Quaking Aspen. The detail in the casting and painting by our craftsman are second none. Features: Log Type: Quaking Aspen. 7 Piece Log Set. See-Thru Gas Logs. Individually Cast Logs. Hand Painted to Enhance the Natural Beauty of the Log. High Quality Cement Refractory with Re-enforced Steel Fiber Construction. Burner needed for Double Face: Grand Canyon Gas Log 2 Burner Double Face Model# 2BRNST. Specifications: Overall Dimensions: 24" (L) .

Brand: LifeZone 123 Model: SGH-2001FRP13 Color: Brown

3 Element infrared quartz fireplace.

Manufacturer: Northern Flame Brand: Northern Flame Color: Black

The Framed Black Wrought Iron Single Panel Screen - 44" x 34" is a gorgeous, traditional screen perfect in any decor. Features: Simple, traditional design | Constructed from wrought iron | Black finish. This screen does not have any other extra decorations on the screen; its simple elegance is enhanced by the wrought iron frame around it. You will enjoy many years of protection against errant sparks by placing this screen in front of your fireplace. Add a matching tool set or fire wood holder to create a complete set for your fireplace hearth!

Manufacturer: HY-C Brand: Hy-C Color: black

Fits Outside Tile Dimensions: 16.5"" x 16.5"" to 18"" x 18"" , Made in the USA , Chimney caps help prevent costly repairs and keep your family safe from harm , Chimney caps protect your chimney from moisture such as snow, ice and rain and debris from close by trees , Chimney caps protect your home from wildlife such as birds and other nesting animals , Chimney caps act as a spark arrestor to prevent most ascending sparks from reaching the outside , Lifetime Limited Warranty , 24 Gauge Single Piece Stainless Steel Hood with Scalloped Corners and Roll Formed Edges , 16 Gauge Stainless Steel Base for Extra Strength , 18 Gauge 3/4"" Expanded Stainless Steel Mesh , Attractive Black Powder-Coated Paint Stainless Steel Finish , Slotted Hex-Head Bolts , Expanded Metal Mesh Turned Inward at Base to Allow Cover to Rest Firmly on Tile Closing Any Openings Around Tile , Outside Mounting Provides Greater Free Air-Space for Better Draft , If you don't have a flue tile to attach to, the bolt-on style is easily converted to a slip-in with a leg kit - CBOLK (not included) , Recommended for use in situations where Oil or Coal is burned, or when Wood/Pellets are used as primary source of heat

Manufacturer: Monessen Hearth Systems Brand: Monessen Hearth Systems

Two wall flue systems require special components-and that's where this CF Series Two wall Chimney Section by Monessen comes in. Designed for use with the CF Series 11 in. diameter chimney flue pipe, this 3 ft. long chimney pipe section is solidly constructed and is designed to be the perfect mix of quality, value and function. This Section is durable, safe, and easy to install, and works in special installations where two wall flues are required by code or type of heating appliance. Features: Model Number: 11CF3. Three foot long section of Monessen CF series 11 in. diameter wood burning flue pipe. Durable, safe, and easy-to-install design. Works in specialized situations where two-wall flues are preferred or are required by code or type of appliance. For use with: 11" CF Two-Wall Flue Components.

Manufacturer: R.H. Peterson Brand: RH Peterson Co.

The Fireback Reflector is designed to reflect additional radiant heat into your room from Vented gas log sets that are 18" or less. This is very beneficial for those who need a little more heat from their gas logs, but do not want to burn ventless logs. The gas log fireback will also add additional character to your gas log set as well as enhance the appearance of the flames. Made from Stainless Steel to last a lifetime without rusting. (pictured in 24" size)

Manufacturer: R.H. Peterson Brand: RH Peterson Co.

R.H. Peterson RD9-30 Ventless Golden Oak DesignerLogs Only (does not include burner). For use with compatible R. H. Peterson vent-free gas log burner system in approved vent free fireplaces only!

Manufacturer: Skytech Brand: SkyTech Model: SKY-5010 Color: Black

The Skytech 5010 remote control system was developed to provide a safe, reliable, and user-friendly remote control system for your gas heating appliance. The Skytech 5010 system can be operated manually from the handheld transmitter. The 5010 system operates using one of 1,048,576 security codes that are programmed into the transmitter at the factory; the remote receiver's code must be matched to that of the transmitter prior to initial use.